| Standard: | AISI, JIS, ASTM, DIN, BS, GB |
|---|---|
| Certification: | IS0, ABS |
| Certificate: | ISO, RoHS, ABS |
| Progressing Service: | Bending, Welding, Decoiling, |
| Length: | 12m or Customized |
| Delivery Time: | 7-10 Days, After Order Placed |
| Samples: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Size(mm) | KG/Meter | Size(mm) | KG/Meter |
| 100*50*5*7 | 9.54 | 250*255*14*14 | 82.2 |
| 100*100*6*8 | 17.2 | 294*200*8*12 | 57.3 |
| 125*60*6*8 | 13.3 | 300*150*6.5*9 | 37.3 |
| 125*125*6.5*9 | 23.8 | 294*302*12*12 | 85 |
| 148*100*6*9 | 21.4 | 300*300*10*15 | 94.5 |
| 150*75*5*7 | 14.3 | 300*305*15*15 | 106 |
| 150*150*7*10 | 31.9 | 338*351*13*13 | 106 |
| 175*90*5*8 | 18.2 | 340*250*9*14 | 79.7 |
| 175*175*7.5*11 | 40.3 | 344*354*16*16 | 131 |
| 194*150*6*9 | 31.2 | 346*174*6*9 | 41.8 |
| 198*99*4.5*7 | 18.5 | 350*175*7*11 | 50 |
| 200*100*5.5*8 | 21.7 | 344*348*10*16 | 115 |
| 200*200*8*12 | 50.5 | 350*350*12*19 | 137 |
| 200*204*12*12 | 72.28 | 388*402*15*15 | 141 |
| 244*175*7*11 | 44.1 | 390*300*10*16 | 107 |
| 244*252*11*11 | 64.4 | 394*398*11*18 | 147 |
| 248*124*5*8 | 25.8 | 400*150*8*13 | 55.8 |
| 250*125*6*9 | 29.7 | 396*199*7*11 | 56.7 |
| 250*250*9*14 | 72.4 | 400*200*8*13 | 66 |
H-shaped steel is an efficient and economical profile with a more optimized cross-sectional distribution and a more reasonable strength-to-weight ratio. It is named because its part is the same as the English letter "H". Since all parts of the H-shaped steel are arranged at right angles, the H-shaped steel has the advantages of high bending strength, simple structure, cost saving, and light weight in all directions, and has been widely used. H-shaped steel is divided into wide-flange H-shaped steel (HW), medium-flange H-shaped steel (HM), narrow-flange H-shaped steel (HN), thin-walled H-shaped steel (HT), H-shaped steel pile (HU), and H-shaped steel. Use steel. The cross-section shape of H-shaped steel is reasonable, economical, and has good mechanical properties. The cross-section is more uniform during the rolling process and the internal stress is smaller. Compared with ordinary I-beams, it has the advantages of large cross-section modulus, light weight, and metal saving, which can reduce the structure of the building by 30-40%, and the legs are parallel to the inside, and outside, the legs are at right angles and Assembled into one component, 25% of the welding and riveting effort can be saved. It is usually used in large buildings (such as factory buildings, high-rise buildings, etc.) that require large bearing capacity and good cross-sectional stability, as well as bridges, ships, lifting and transportation machinery, equipment foundations, supports and foundation piles. H-section steel is an economical section steel with better cross-sectional mechanical properties developed from I-section steel, especially the section steel with the same name as the English letter "H".
Shengtian Industry Limited is located in Hebei, China. It is a group company integrating R&D, production, sales, service and logistics. With a workshop of 8,000 square meters and 2,000 employees, it is an enterprise with the most development potential.
Shengtian Industry Limited has invested a total of 300 million yuan to build production lines and advanced equipment. There are 12 existing production lines with an annual production capacity of 5 million tons. The main products are steel plate,steel coil,round steel,structural steel,flat steel and so on.
1. When storing, attention should be paid to moisture, dust, oil, lubricating oil, etc., as well as surface rust or poor welding, which may result in a decrease in corrosion resistance. When water is immersed between the film and the steel plate substrate, the corrosion rate is actually faster than when there is no film applied. When storing stainless steel in the warehouse, it should be placed in a clean, dry and easily ventilated place, maintaining its original packaging state. The coated stainless steel should avoid direct sunlight, and the film should be inspected periodically. If the film deteriorates (with a lifespan of 6 months), it should be replaced immediately. If the packaging material is wet when adding the pad paper, the pad paper should be removed immediately to prevent surface corrosion.
2. To avoid surface scratches during transportation, rubber or sleepers should be used, and stainless steel protective materials should be used as much as possible. To avoid surface pollution caused by fingerprints, gloves should be worn during operation.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}